Performix Coatings
Performix Coatings
3920 Pheasant Ridge Drive Blaine, MN 55449
Phone: 1-800-969-5432 ext 6104
Fax: 763.785.2058
E-Mail: contact@performixcoatings.com
Website: www.performixcoatings.com
Print Back
Super Grip® F-844 is an air dry synthetic rubber non-skid fabric coating. The unique tackified coating adheres to most fabrics and absorbent surfaces to stop skidding, shifting and slippage. Super Grip is durable and can be machines washed. Super Grip will not transfer once properly dried.

Super Grip® is excellent for adding non-skid properties to throw rugs, canvas, fabric covered items such as cushions, hand tools, clothes hangers, sporting good handles, bottom of glassware, foam blocks used for yoga and other exercise, gloves, place mats, anti-fatigue mats and as a positioning aide on cardboard and other packaging materials.
Unit of Measure

Technical Specs

Brands

 N/A Performix®

Temperature Use Range

 N/A -30 to 200 ºF

Shelf Life

 N/A 1+ years at 77 ºF unopened container

Coverage

 N/A 500 ft²/gal at 1 mil

Finish

 N/A Tacky

Alternative Products

 N/A F-873 NON-SKID

Surface Preparation

 N/A MIX WELL BEFORE USE.
All surfaces to be coated must be free of any oils, dust or loose foam/fabric particles.
Use Adequate Ventilation.

Aerosol- follow container instructions carefully.

Other Features Include

N/A Quick Dry
Machine Washable
Excellent Flexibility

Spraying

N/A Pressure pot/conventional sprayers may be used. Dilute is NOT recommended. Gently mix before spraying. Apply wet, overlapping coats holding gun 6"-12" from surface using a 4"-6" pattern. Generally one coat is all that is needed.

Recommended Equipment and Settings

N/A Binks® model 2100 gun
Nozzle: 63B
Cap: 63PB
Needle: 363A
Material: 20 to 25 psi
Atomization: 15 to 25 psi
Dilution: not recommended
Clean up: Toluene, Naphtha or Xylene

Brushing

N/A Gently mix before each use. Apply wet, overlapping coats using a soft natural bristle brush. Generally one coat is all that is needed.

Hints

N/A Recommended thinners: Toluene, Naphtha or Xylene. Allow overnight drying whenever possible. Always use proper ventilation and protection.

Note

N/A For Industrial Use Only.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

Performix and logo are trademarks of PLASTI DIP INTERNATIONAL
BINKS is a registered trademark of BINKS MFG. CO., Franklin Park, IL