N/A F-632 may coagulate during storage, requiring thorough mixing before use each day. For best results, a high speed air or explosion proof electric drum mixer along with a Cowles® or other dispersion blade gives the maximum combination of high shear, excellent flow and circulation. Diameters of 3” for mixing five gallon containers and 7” for mixing 50 gallon drums. Note: It has been found that the dispersion blades are highly effective, fast and produce more shearing action than can be obtained from a standard mixing blade or paddle. Occasional gentle mixing every 2 hours is recommended.

N/A All surfaces to be glued must be free of any oils, dust or other foreign matter. Lightly wipe down vinyl with alcohol and let dry. Cut patch material to size; round patch corners. For best results, use in temperatures above 50°F.

USE ADEQUATE VENTILATION.

N/A Apply VYNA BOND sparingly to patch, let dry 1-3 minutes and press firmly into place. Allow 2-4 hours dry time for normal use. Allow 24-36 hours dry time for maximum strength.

N/A Apply VYNA BOND liberally to patch, let dry 1-3 minutes and press firmly, squeezing all air bubbles out of repair area. Allow 24-36 hours dry time for maximum strength.

N/A Cut off or locate a similar piece of vinyl. Apply VYNA BOND liberally to both surfaces, let dry 1-3 minutes and press firmly into place. Allow 2-4 hours dry time for normal use. Allow 24-36 hours dry time for maximum strength.

N/A Apply Vyna Bond liberally to both surfaces, let dry 1-3 minutes then press together firmly. Allow 2-4 hours dry time or 24-36 hours if applying coatings to the foam.

N/A Under normal conditions thinning is not necessary. If it is needed, use Methyl Ethyl Ketone. Allow overnight drying whenever possible. If poor initial bond results, re-apply a thin coat and press together immediately. Avoid excessive air movement, heat or humidity. Always use proper ventilation and protection.

N/A For Industrial Use Only.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

VLP, Performix and logo are registered trademarks of PLASTI DIP INTERNATIONAL