Skip To Content
ISO 9001:2015
mail_outline contact@performixcoatings.com call 1-800-969-5432 ext 6104 search

Catalog

Request Information
F-851's' is a water base in mold barrier coating is specifically developed to use as an IMC (in mold coating) for flexible polyurethane foams. F-851's' is very economical, efficient, non-flammable and also reduces the risk of coating adhesion issues with top coats. F-851's' is used in manufacturing of patient positioning products such as wheelchair cushions, positioning aids as well as other industrial applications.
Unit of Measure

Technical Specs

Brands

 N/A Performix®

Solids Weight

 N/A 36 %

Shelf Life

 N/A 1+ years at 77 ºF unopened container

Coverage

 N/A 250 ft²/gal at 2 mils

Finish

 N/A Matte

Other Features Include

N/A Intended for use in molds with starting temps 80-110ºF.
Water base clean-up.
One component - no catalyst
Custom color matching

Surface Preparations

N/A MIX WELL BEFORE USE.
All surfaces to be coated must be free of any oils, dust, release agent build up or loose foam particles. Allow any solvent to flash before applying F-851's'
USE ADEQUATE VENTILATION

Spraying

N/A GENTLY MIX BEFORE SPRAYING.
Pressure pot sprayers are recommended. Bring mold to temp to 125-135 degrees F. Apply light (damp) overlapping coat of F-851's' to mold, holding gun 6"-12" from surface, using 4"-6" pattern. Be sure to coat the entire surface. Allow F-851's' to become "tacky" before adding polyurethane chemicals. Allow adequate "bake" time for the foam before removing finished product. Contact OEM Technical Support for more details regarding your specific application and process and top coat recommendations.

Recommended Equipment and Settings

N/A Binks® model 2100 gun
Nozzle: 63C
Cap: 63PB or 66SD
Needle: 363A
Material: 20psi
Atomization: 10-30psi
Dilution: not recommended
Clean up: water, MEK once dried.

Note

N/A For Industrial Use Only.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

PDC and eccs are registered trademarks of PLASTI DIP INTERNATIONAL
Performix and logo are trademarks of PLASTI DIP INTERNATIONAL
BINKS is a registered trademark of BINKS MFG. CO., Franklin Park, IL