N/A Cannot be used or sold in these states for Personal use: AZ, CA, RI, and TN (use PLASTI DIP® SPRAY 50) Cannot be used or sold in these states for Professional use (Professional use includes auto body, paint shop, dealer, fleet repair, and applicator of products for compensation.): AZ, CA, DE, IL, IN, MA, MD, MI, NJ, RI, TN, TX, UT and WI (use PLASTI DIP® SPRAY 50)
Cannot be used or sold in Canada and Internationally (use PLASTI DIP® SPRAY 50)

If you have questions about the sale or use of these products in your area, please consult your local codes and regulations.

N/A Use Adequate Ventilation. Mix Well Before Use.
All surfaces to be coated must be free of oils, grease, dirt, wax and any loose rust. For best results the surfaces being coated must have a smooth unbroken OEM finish.

N/A Apply using only compliant/ approved HVLP gun [electric turbine style] that meets all local regulations. Keep spray gun 10-12 inches away from surface, applying wet overlapping coats. Allow 10-30 minutes dry time (dry to the touch) before applying additional coats. A minimum of 5 coats is recommended for best performance and easy removal.

N/A PDS colors (F-971)- suitable for application over most cast or calendered vinyl, cast vinyl with PU clear laminated or PU clear top coat finish as well as most PU protective films. Applying HGTC (F-992) over PDS colors (F-971) can cause some dulling when combination is applied over cast vinyl.
PDS Clear (F-975)- suitable for applications over cast vinyl, cast vinyl with PU clear laminated or PU clear top coat finish as well as most PU protective films.
PDS Clear (F-975)- may cause some dulling of finish when removed from calendered vinyl (less UV protection with Clear versus colors).

N/A Mix PLASTI DIP® SPRAY thoroughly before each use and refilling of spray equipment. A dry coating thickness of 10 mils minimum is recommended for best performance and easiest removal. Allow 4 hours cure time for each coat applied before using.

RETARDING in hot weather (78ºF or higher, high dew point 45ºF or higher) add upto 20% Xylene in 5% by weight increments. IMPORTANT, for every 5% xylene added you must apply one more coat to ensure proper color coverage and adequate film thickness for easy removal and best performance.

Avoid excessive air movement, heat and humidity while applying. Always use proper ventilation and protection.

N/A Automotive Refinishing Coating

COATING IS READY TO USE. MIX AND SPRAY. SEE HINTS FOR RETARDING INSTRUCTIONS BELOW.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLAST DIP INTERNATIONAL technical service.

Performix and logo are trademarks of PLASTI DIP INTERNATIONAL