Skip To Content
ISO 9001:2015
mail_outline contact@performixcoatings.com call 1-800-969-5432 ext 6104 search

Catalog

Request Information
PLASTI DIP® SPRAY 50 Low VOC is a "ready to use" coating used for automotive refinishing as a peelable, protective coating for emblems, decorative stripes and designs, wheels, bumpers, accessories, truck bed or the entire vehicle.

PLASTI DIP® SPRAY 50 Low VOC (F-1066) meets category requirements for "Color Coating/ Single-Two Stage/ Top Coats". VOC Content (as supplied) not to exceed: Actual 340 g/l Regulatory 340 g/l

PLASTI DIP® SPRAY 50 Low VOC (F-1067) meets category requirements for "Clear Coating/ Top Coats". VOC Content (as supplied) not to exceed: Actual 250 g/l Regulatory 250 g/l

PLASTI DIP® SPRAY 50 Low VOC is 50 State Compliant.

DO NOT REDUCE THIS COATING. IT IS READY TO USE. MIX AND SPRAY.
Unit of Measure

Technical Specs

Brands

 N/A Performix®

Directions

N/A Use Adequate Ventilation. Mix Well Before Use.
All surfaces to be coated must be free of oils, grease, dirt, wax and any loose rust. For best results the surfaces being coated must have a smooth unbroken OEM finish.

Spraying

N/A Apply using only compliant/ approved HVLP gun [electric turbine style] that meets all local regulations. Keep spray gun 10-12 inches away from surface, applying wet overlapping coats. Allow 10-30 minutes dry time (dry to the touch) before applying additional coats. A minimum of 5 coats is recommended for best performance and easy removal.

Vinyl Decals/Stripes

N/A PDS 50 colors or clear- are suitable for application over most calendered vinyl, cast vinyl with PU clear laminated or PU clear top coat finish as well as most PU protective films.
PDS 50 colors or clear- are not recommended for applications over cast vinyl

Hints

N/A Mix PLASTI DIP® SPRAY 50 Low VOC thoroughly before each use and refilling of spray equipment. A dry coating thickness of 10 mils minimum is recommended for best performance and easy removal. Allow 4 hours cure time for each coat applied before using. Avoid excessive air movement, heat and humidity while applying.
Always use proper ventilation and protection.

Note

N/A Automotive Refinishing Coating

NOT for sale or use in these California counties- El Dorado, Colusa, Glenn, Bay Area (BAAQMD).

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLAST DIP INTERNATIONAL technical service.

Performix and logo are trademarks of PLASTI DIP INTERNATIONAL